Concept Guide

aaa xml-api
aaa xml-api server <ipaddr>
clone <server>
default-authentication-role <role>
key <key>
no ...
Description
This command configures an external XML API server.
Syntax
Parameter Description
server
IP address of the external XML API server.
clone
Name of an existing XML API server configuration from which
parameter values are copied.
key
Preshared key to authenticate communication between the
controller and the XML API server.
default-authentication-role <role>
Name of the role to be assigned to users after completing
XML server authorization.
no
Negates any configured parameter.
Usage Guidelines
XML API is used for authentication and subscriber management from external agents. This command
configures an external XML API server. For example, an XML API server can send a blacklist request for a client
to the controller. The server configured with this command is referenced in the AAA profile for the WLAN (see
aaa profile on page 96). Contact your Dell representative for more information about using the XML API.
Example
The following configures an XML API server:
aaa xml-api server 10.210.1.245
key qwerTYuiOP
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms PEFNG license Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa xml-api | 126