Concept Guide

activate-service-whitelist
activate-service-whitelist
add-only
interval <days>
no ...
password <password
username <username>
whitelist-enable
Description
This command configures the profile that allows the controller to integrate with the Dell Activate cloud-based
services to track, provision and update your remote APs.
Syntax
Parameter Description
add-only
Allow only addition or modification of entries to the Activate remote AP whitelist
database. This parameter is enabled by default. If this setting is disabled, the
activate-whitelist-download command can both add and remove entries from the
Activate database.
interval <days>
Number of days between the automatic synchronization of the controller remote
AP whitelist entries with the Activate whitelist.
The supported range is 1-7 days, and the default value is 1 day.
no
Removes or disables an existing parameter.
password <password>
Activate user password
username <username>
Activate username
whitelist-enable
Issue this command to enable secure AP whitelist synchronization with the Activ-
ate service. This feature is disabled by default.
Usage Guidelines
Use this command to configure the credentials to synchronize the remote AP whitelist with an Activate server.
The controller and the Activate server must have layer-3 connectivity to communicate.
Example
The following example enables the Activate whitelist service on the controller:
(host)(config)# activate-service-whitelist
(host)(activate-service-whitelist) #username user2 password pA$$w0rd whitelist-enable
Related Commands
Parameter Description
activate
This command synchronizes the remote APwhitelist on the controller from the
cloud-based Activate service.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide activate-service-whitelist | 130