Concept Guide

1304| show ap spectrum device-list Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
microwave-inverter
Show only microwave inverter devices.
NOTE: This option is available only for 2.4 GHz spectrum devices.
video
Show only video fixed frequency devices.
xbox
Show only xbox frequency hopper devices.
NOTE: This option is available only for 2.4 GHz spectrum devices.
Usage Guidelines
Issue this command to view detailed information about currently active non-Wi-Fi devices on the network. Use
the optional type parameter to display data for one specific device type only. For additional details about non-
Wi-Fi device types shown in this table, see Non-Wi-Fi Interferers on page 1299.
A hybrid AP on a 20 MHz channel will see 40 MHz Wi-Fi data as non-Wi-Fi data.
Examples
The output of this example shows that the spectrum monitor ap123 is able to see data for a single non-Wi-Fi
device on its 802.11a radio. Note that the output below is divided into two sections to better fit on the page of
this document. In the ArubaOS CLI, this information is displayed in a single long table.
(host) #show ap spectrum device-list ap-name ap123 freq-band 5ghz
Non-Wifi Device List Table
--------------------------
Type ID Cfreq Bandwidth Channels-affected Signal-strength
---- -- ----- --------- ----------------- ---------------
Cordless Phone FH 3 5826093 80000 149 157 161 165 49
Duty-cycle Add-time Update-time
---------- -------- -----------
5 2010-05-17 10:04:53 2010-05-17 10:04:55
Total:1
Current Time:2010-05-17 10:04:56
The output of this command includes the following information:
Column Description
Type Device type. This parameter can be any of the following:
l audio FF (fixed frequency)
l bluetooth
l cordless base FH (frequency hopper)
l cordless phone FF (fixed frequency
l cordless network FH (frequency hopper)
l generic FF (fixed frequency
l generic FH (frequency hopper)