Concept Guide

show ap virtual-beacon-report
show ap virtual-beacon-report
all
ap-name <name>
client-mac <macaddr>
ip-addr <ipaddr>
ip6-addr <ipv6addr>
Description
If the client match feature is enabled, the output of this command displays the virtual beacon report for an
APor a client with a specific IP or MAC address.
Syntax
Parameter Description
all
Virtual beacon report for all clients on the controller.
ap-name <name>
Name of the AP for which you want to view a virtual beacon report.
client-mac <macaddr>
MAC address of a client for which you want to view a virtual beacon report.
ip-addr <ipaddr>
IPv4 address of an AP for which you want to view a virtual beacon report.
ip6-addr <ipv6addr>
IPv6 address of an AP for which you want to view a virtual beacon report.
Usage Guidelines
Use this command to display the client RSSI from the APs in its RF neighborhood, the channel used by each AP
radio, and the number of clients associated to each radio.
Example
The example below displays the virtual beacon report for a client with MAC address 24:77:03:d1:24:b8.
(host) #show ap virtual-beacon-report client-mac 24:77:03:d1:24:b8
Client MAC :24:77:03:d1:24:b8
Current association :1260-205 (9c:1c:12:fe:0f:d0)
Steer attempts/Success :2/1
Consecutive (Fails/BTM Rej/BTM Timeouts) :0/0/0
Bandsteer window (Steers/Start time/Expiry time) :0/0/0
Client Device Type :Win 7
Current state :Steerable
Client Supported Channels :{36,4}{52,4}{100,11}{149,4}{165,1}
Current Time :Oct 29 15:56:06 2014
STA Beacon Report
-----------------
AP IP address Radio ESSID Signal (dBm) Last update
Add time Channel/EIRP/Clients Flag
-- ---------- ----- ----- ------------ ----------- -
------- -------------------- ----
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap virtual-beacon-report | 1336