Concept Guide

show ap vlan-usage
show ap vlan-usage [{ap-name <ap-name>}|{bssid <bssid>|{essid <essid>|{ip-addr <ip-addr>}|
{virtual-ap <virtual-ap}
Description
Show the numbers of clients on each VLAN.
Syntax
Parameter Description
ap-name <ap-name>
Show VLAN data for an AP with a specific name.
bssid <bssid>
Show VLAN data for a specific Basic Service Set Identifier (BSSID) on
an AP. The Basic Service Set Identifier (BSSID) is usually the AP’s MAC
address.
essid <essid>
Show VLAN data for a specific Extended Service Set Identifier (ESSID).
An Extended Service Set Identifier (ESSID) is a alphanumeric name that
uniquely identifies a wireless network. If the name includes spaces, you
must enclose the ESSID in quotation marks.
ip-addr <ip-addr>
Show VLAN data for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
ip6-addr <ip6-addr>
Show VLAN data for an AP with a specific IPv6 address by entering an IP
address in dotted-decimal format.
virtual-ap <virtual-ap>
Show VLAN pool allocation by VAP name.
Examples
The output of this command displays the VLAN Usage table.
(host) #show ap vlan-usage
VLAN Usage Table
----------------
VLAN ID Clients
------- -------
64 1
65 32
66 44
The output of this command includes the following information:
Column Description
VLAN ID
ID number of the wireless VLAN.
Clients
Number of clients currently using the specified VLAN.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap vlan-usage | 1341