Concept Guide

137| airgroup Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
location-discovery
{disable|enable}
Disables/Enables location
discovery.
If enabled, an AirGroup user can
see shared devices based on the
proximity of the user.
This parameter is available on
the master controller only. The
master controller pushes this
AirGroup configuration to all the
applicable local controllers.
NOTE: This parameter is
available only in Config mode.
— enable
mdns {disable|enable}
Disables/Enables AirGroup
mDNS support on the controller.
NOTE: This parameter is
available only in Config mode.
— disable
policy <mac> {grouplist
{STRING|add|remove}
|location{ap-fqln|ap-
group|ap-name}|no
{grouplist|location
{ap-fqln|ap-group|ap-
name}
|rolelist|userlist}
|rolelist
{STRING|add|remove}
|userlist
{STRING|add|remove}}
Configures the following policy
for an AirGroup server:
grouplist
{STRING|add|remove}:
Configures shared group-name
for the AirGroup server.
location{ap-fqln|ap-group|ap-
name}: Configures shared
location for the AirGroup server.
no {grouplist|location {ap-
fqln|ap-group|ap-name}
|rolelist|userlist}: Delete
command.
rolelist {STRING|add|remove}:
Configures shared role-name for
the AirGroup server.
userlist
{STRING|add|remove}:
Configures shared user-name for
the AirGroup server.
<mac>: MAC address of
AirGroup server.
NOTE: This parameter is
available only in Config mode.
— —
service <STRING>
{disable|enable}
Disables/Enables an AirGroup
service on the controller.
<STRING> is the name of the
AirGroup service.
NOTE: This parameter is
available only in Config mode.
— Services enabled by
default:
l AirPlay
l AirPrint
l DIAL