Concept Guide

show clock
show clock [summer-time|timezone|append]
Description
Display the system clock.
Syntax
Parameter Description
summer-time
Show summer (daylight savings) time settings.
timezone
Show the configured timezone for the controller.
append
If the timestamp feature is enabled, including a timestamp in show command
output.
Usage Guidelines
Include the optional summer-time parameter to display configured daylight savings time settings. The
timezone parameter shows the current timezone, with its time offset from Greenwich Mean Time.
Example
The output below shows the current time on the controller clock.
(host) # show clock Thu Feb 5 16:52:28 PST 2009
Related Commands
Configure clock settings using the commands clock append, clock summer-time recurring, and clock timezone.
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show clock | 1394