Concept Guide

show crypto map
show crypto ipsec map
Descriptions
This command displays the IPsec map configurations.
Syntax
Parameter Description
map
Usage Guidelines
Use the show crypto map command to view configuration for global, dynamic and default map configurations.
Examples
The command show crypto map shows statistics for the global, dynamic and default maps.
(host) (config) #show crypto map
Crypto Map "GLOBAL-IKEV2-MAP" 10000 ipsec-isakmp
Crypto Map Template"default-rap-ipsecmap" 10001
IKE Version: 2
IKEv2 Policy: DEFAULT
Security association lifetime seconds : [300 -86400]
Security association lifetime kilobytes: N/A
PFS (Y/N): N
Transform sets={default-gcm256, default-gcm128, default-rap-transform }
Crypto Map "GLOBAL-MAP" 10000 ipsec-isakmp
Crypto Map Template"default-dynamicmap" 10000
IKE Version: 1
IKEv1 Policy: All
Security association lifetime seconds : [300 -86400]
Security association lifetime kilobytes: N/A
PFS (Y/N): N
Transform sets={default-transform, default-aes }
Related Commands
Command Description Mode
crypto map global-map
Use this command to configure the default
global map.
Config mode
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show crypto map | 1427