Concept Guide

1435| show datapath Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
dma counters
DMA statistics are displayed.
eap counters
EAP termination statistics are displayed.
eth1info
Displays IPv4 fragment table statistics.
memory
Displays SOS memory statistics.
opcode
Displays datapath debugging information.
NOTE: Use this command only under the supervision
of Dell technical support.
performance all
Displays datapath debug performance statistics
including the SUM/CPU, addr, and description.
<id>
Displays datapath performance counters by specified
CPU ID display.
counters
Displays datapath performance counters.
event-guide
Displays :
l COP0 Events
l L3 Cache Events
l NAE-RX Events
l NAE-TX Events (by register index 0-4)
verbose
Displays debug performance statistics including:
SUM/CPU, addr, description, value, and difference
from last show.
dhcp
Datapath DHCP -related information.
dpi application <appid>
Displays the Deep Packet Inspection application
default ports.
error
Datapath error statistic errors.
counters
Show datapath errors including SUM, CPU, Addr and
description information.
esi table
Displays the contents of the datapath ESI server table
entries including server, IP, MAC, destination, VLAN,
type, session and flag information.