Concept Guide

Parameter Description
IP classification
If enabled, supports IP (reputation/geolocation)
classification. This helps in rejecting traffic sent
or received from those IP addresses classified as
malicious based on the policy configured. Using
the geolocation IP database the geographical
location of the malicious IP address is also
determined, and traffic is permitted or denied
after scanning the geographic based rules
configured by the administrator.
Default: enabled
Related Commands
Command Description
firewall
This command configures firewall options on the controller.
firewall cp
This command creates whitelist session ACLs
firewall cp-bandwidth-contract
This command configures bandwidth contract traffic rate limits to
prevent denial of service attacks.
Command History
Release
Modification
ArubaOS 3.4 Command introduced.
ArubaOS 6.4 The following parameters were introduced:
l Jumbo Frames
l Stall Detection
l DPI Classification
l STUN Based Traversal
ArubaOS 6.4.1 The following parameters were introduced as part of the show firewall
command:
l Blacklist Grat ARP attack client
l Blacklist ARP attack client
l Monitor ARP attack
l Monitor Gratuitous ARP attack
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show firewall | 1492