Concept Guide

1503| show-global-user-table list Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
not
Show users that do not satisfy the given criteria
or
Show users that satisfy any of the given criteria
rows
Number of rows to show
sort
Sort the list based on a specified criteria, in ascending or descending order
start
Show user table starting from a specific row
Example
Issue this command to display a global user count. The output of this command is split into two tables in this
document, however it appears in one table in the CLI.
(host) (config) show user role employee
Global Users
-----
IP MAC Name Role Age(d:h:m) Auth VPN link AP
name
---------- ------------ ------ ---- ---------- ---- -------- ----
---
192.168.160.1 00:23:6c:80:3d:bc madisonQ employee 01:05:50 802.1X AP63
10.100.105.100 00:05:4e:45:5e:c8 CorpNetwork2 employee 00:02:22 802.1X
wlanAP
10.100.105.102 00:14:a5:30:c2:7f fdedhia employee 01:20:09 802.1X AP98
10.100.105.97 00:1b:77:c4:a2:fa CorpNetwork2 employee 00:02:18 802.1X AP98
10.100.105.109 00:21:5c:02:16:bb melindayao employee 00:05:40 802.1X AP09
users
-----
Roaming Essid BssidPhy Profile Forward mode Type
------- ---------------- ------- -------------------- ------------ ----
Associated wirelessint-wpa2 00:1a:1e:85:d3:b1 a-HT default tunnel
Associated wirelessint-wpa2 00:1a:1e:6f:e5:51 a default tunnel
Associated wirelessint-wpa2 00:1a:1e:87:ef:f1 a default tunnel
Associated wirelessint-wpa2 00:1a:1e:87:ef:f1 a default tunnel
Associated wirelessint-wpa2 00:1a:1e:85:c2:11 a-HT default tunnel ipad
The output of this command includes the following parameters:
Parameter Description
IP
IP address of user.
MAC
MAC address of user.
Name
User name.
Current Switch
IP address of the switch where the user is currently associated.