Concept Guide

show iap detailed-table
show iap detailed-table
branch-key <brkey>
long
Description
Displays the details of all the branches terminating at the controller.
Syntax
Parameter Description
branch-key <brkey>
Key for the branch, which is unique to each branch.
long
Displays the branches connected to the controller in detailed view.
Example
This example shows the details of the branches connected to the controller:
(host) #show iap detailed-table long
Name VC MAC Address Status Inner IP Key
---- -------------- ------ -------- -------------------------------------
Instant-C0:8C:08 d8:c7:c8:c4:73:53 UP 1.1.1.1 2d15576901190269568c3d9837fc1b414e1b06
523282805aaa
Instant-C0:8C:08 d8:c7:c8:c4:73:53 UP 1.1.1.1 2d15576901190269568c3d9837fc1b414e1b06
523282805aaa
Instant-C0:8C:08 d8:c7:c8:c4:73:53 UP 1.1.1.1 2d15576901190269568c3d9837fc1b414e1b06
523282805aaa
Flags Branch (Subnet / Vlan) BID IP Address Range Client Count
----- ---------------------- --- ------------------ ------------
PD2 52 0 52.1.1.2-52.1.1.100 5
PD3 53.1.1.8/29 0 53.1.1.1-53.1.1.100 5
PC2 51 0
Flags: P = Primary Tunnel; B = Backup Tunnel; C = Centralized; U = Unassigned;
D = Distributed; L = Local; 3 = Routed(L3); 2 = Bridged(L2);
The output of this command includes the following parameters:
Parameter Description
Name
Name of the branch
VC MAC Address
MAC address of the Virtual Controllerof the branch
Status
Current status of the branch (UP/DOWN)
Inner IP
Internal VPN IP of the branch
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show iap detailed-table | 1516