Concept Guide

show ids impersonation-profile
show ids impersonation-profile <profile-name>
Description
Display an IDS Impersonation Profile.
Syntax
Parameter Description
<profile-name>
Name of an IDS Impersonation profile.
Usage Guidelines
Issue this command without the <profile-name>parameter to display the IDS Impersonation profile list.
Include a profile name to display detailed configuration information for that profile.
Examples
The example below displays that the controller has five configured Impersonation profiles.
(host) (config) #show ids impersonation-profile
IDS Impersonation Profile List
------------------------------
Name References Profile Status
---- ---------- --------------
default 4
test 0
test1 1
Wizard-test 1
Wizard-test2 1
Total:5
In the example above, the Reference column indicates the number of references to the profile named in the
Name column. The Profile Status column is blank unless the rule is predefined.
The example below displays the configuration settings for the profile test1.
(host) (config) #show ids impersonation-profile test1
IDS Impersonation Profile "test1"
---------------------------------
Parameter Value
--------- -----
Detect AP Impersonation false
Protect from AP Impersonation false
Beacon Diff Threshold 50 %
Beacon Increase Wait Time 3 sec
Detect AP Spoofing true
Detect Beacon Wrong Channel false
Beacon Wrong Channel Detection Quiet Time 900 sec
Detect Hotspotter Attack true
Hotspotter Quiet Time 900 sec
The output of this command includes the following parameters:
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ids impersonation-profile | 1532