Concept Guide

1533| show ids impersonation-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Detect AP Impersonation
Shows of the profile has enabled or disabled
detection of AP impersonation.
Protect from AP Impersonation
Shows if AP impersonation is enabled or disabled for
the profile. When AP impersonation is detected, both
the legitimate and impersonating AP are disabled
using a denial of service attack.
Beacon Diff Threshold
Percentage increase in beacon rates that triggers
an AP impersonation event.
Beacon Increase Wait Time
Time, in seconds, after the beacon difference
threshold is crossed before an AP impersonation
event is generated.
Detect AP Spoofing
AP Spoofing detection is enabled
Detect Beacon Wrong Channel
Disable detection of beacons advertising the
incorrect channel
Beacon Wrong Channel Detection Quiet Time
Wait 90 seconds after detecting a beacon with the
wrong channel after which the check can be
resumed.
Detect Hotspotter Attack
Enable detection of the Hotspotter attack to lure
away valid clients.
Hotspotter Quiet Time
Wait 90 seconds after detecting an attempt to Use
the Hotspotter tool against clients.
Related Commands
Configure IDS impersonation profiles using the command ids impersonation-profile.
Command History
Version Description
ArubaOS 3.0 Command Introduced
ArubaOS 6.0 Refreshed show output
Command Information
Platforms Licensing Command Mode
Available on all platforms Requires the RFprotect license Config mode on master controllers