Concept Guide

show ifmap
show ifmap
cppm
state cppm
Descriptions
Issue this command to show the CPPM IF-MAP configuration profile and the IP-MAP connection state.
Syntax
Parameter Description
cppm
Shows the CPPM IF-MAP profile parameters and their values.
state cppm
Shows the CPPM IF-MAP connection state including if it is enabled, and the serv-
ers and their state.
Example
To configure this feature using the CLI:
(host) (config) #ifmap
(host) (config) #ifmap cppm
(host) (CPPM IF-MAP Profile) #server host <host>
(host) (CPPM IF-MAP Profile) #port <port>
(host) (CPPM IF-MAP Profile) #passwd <psswd>
(host) (CPPM IF-MAP Profile) #enable
This show command show if the CCPM interface is enable and the CPPM server IP address, username and
password.
(host) (CPPM IF-MAP Profile) #show ifmap cppm
CPPM IF-MAP Profile
-------------------
Parameter Value
--------- -----
CPPM IF-MAP Interface Enabled
CPPM IF-MAP Server 10.10.10.10:443 admin/********
This show command shows if state of all enabled CPPM servers.
(host) (CPPM IF-MAP Profile) #show ifmap state cppm
CPPM IF-MAP Connection State [Interface: Enabled]
-------------------------------------------------
Server State
------ -----
10.4.191.32:443 UP
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ifmap | 1551