Concept Guide

show ip domain-name
show ip domain-name
Description
Show the full domain name and server.
Syntax
No parameters.
Examples
The example below shows that the IP domain lookup feature is enabled, but that no DNS server has been
configured on the controller.
(host) #show ip domain-name
IP domain lookup: Enabled
IP Host.Domain name: MyCompany2400.
No DNS server configured
Related Commands
Command Description
ip domain lookup
This command enables Domain Name System (DNS) hostname to address
translation.
ip domain-name
This command configures the default domain name.
ip dhcp pool
This command configures a DHCP pool on the controller.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Available in Config or Enable mode on
master or local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ip domain-name | 1594