Concept Guide

1598| show ip igmp Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Examples
The example below displays the IGMP interface table for all VLANs on the controller.
(host) # show ip igmp interface vlan 2
IGMP Interface Table
--------------------
VLAN Addr Netmask MAC Address IGMP Snooping Querier
Destination IGMP Proxy
---- ---- ------- ----------- ---- -------- ------- ----------
- -----------
64 10.6.4.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.4.252 CP
disabled
65 10.6.5.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.5.252 CP
disabled
1 10.6.2.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.2.252 CP
disabled
66 10.6.6.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.6.252 CP
disabled
63 10.6.3.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.3.252 CP
disabled
The output of this command includes the following parameters:
Parameter Description
VLAN
A VLAN ID number.
Addr
IP address of a VLAN router.
Netmask
Subnet mask for the IP address.
MAC Address
MAC destination address.
IGMP
Indicates if IGMP is enabled (or disabled) on the interface.
Snooping
Indicates if IGMP snooping is enabled (or disabled).
Querier
IP address of an IGMP querier.
Destination
Traffic destination.
IGMP Proxy
Indicates if IGMP proxy is enabled (or disabled).
The following example displays the current IGMP configuration settings for the controller.
(host) #show ip igmp config
IGMP Config
-----------
Name Value
---- -----
robustness-variable 2
query-interval 30
query-response-interval 100
startup-query-interval 31
startup-query-count 2
last-member-query-interval 10