Concept Guide

ap flush-r1-on-new-r0
ap·flush-r1-on-new-r0 {enable|disable}
Description
Use this command to enable or disable flushing of R1 keys, when R0 is updated for d-tunnel or bridge mode.
Syntax
Parameter Description
enable
Enable flushing of R1 keys.
disable
Disable flushing of R1 keys.
Example
The following example enables flushing of R1 keys.
(host) (config) #ap flush-r1-on-new-r0 enable
The following command displays the status of flushing of R1 keys.
(host) (config) #show flush-r1-on-new-r0
Fast Roaming flush-r1-on-new-r0:enable
Command History
Release Modification
ArubaOS 6.3 Command introduced
Command Information
Platforms Licensing Command Mode
Available on all platforms Base operating system Enable mode or Config mode.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap flush-r1-on-new-r0 | 164