Concept Guide

ap lldp profile
ap lldp profile <profile>
clone <profile>
dot1-tlvs port-vlan|vlan-name
dot3-tlvs link-aggregation|mac|mfs|power
lldp-med-network-policy-profile <profile>
lldp-med-tlvs capabilities|inventory|network-policy
no ...
optional-tlvs capabilities|management-address|port-description|system-description|system-
name
receive
transmit
transmit-hold <transmit-hold>
transmit-interval <transmit-interval>
Description
Define an LLDP profile that specifies the type-length-value (TLV) elements to be sent in LLDP PDUs.
Syntax
Parameter Description
clone <profile>
Make a copy of an existing LLDP profile.
dot1-tlvs
Specify which of the following 802.1 TLVs the AP will
send in LLDP PDUs. By default, the AP will send all
802.1 TLVs.
port-vlan
Transmit the LLDP 802.1 port VLAN TLV. If the native
VLAN is configured on the port, the port-vlan TLV will
send that value, otherwise it will send a value of “0”.
vlan-name
Transmit the LLDP 802.1 VLAN name TLV. The AP
sends a value of "Unknown" for VLAN 0, or "VLAN
<number>" for non-zero VLAN numbers.
dot3-tlvs
Specify which of the following 802.3 TLVs the AP will
send in LLDP PDUs. By default, the AP will send all
802.3 TLVs.
link-aggregation
Transmit the 802.3 link aggregation TLV to indicate
that link aggregation is not supported.
mac
Transmit the 802.3 MAC/PHY Configuration/Status
TLV to indicate the AP interface’s duplex and bit rate
capacity and current duplex and bit rate settings.
mfs
Transmit the 802.3 Maximum Frame Size (MFS) TLV
to show the AP’s maximum frame size capability.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap lldp profile | 172