Concept Guide

show master-redundancy
show master-redundancy
Description
Display the master controller redundancy configuration.
Syntax
No parameters.
Example
This example below shows the current master redundancy configuration, including the ID number of the
master VRRP virtual router and the IP address of the peer controller for master redundancy.
(host) #show master-redundancy
Master redundancy configuration:
VRRP Id 2 current state is MASTER
Peer's IP Address is 2.1.1.4
Related Commands
Command Description
master-redundancy
master-vrrp
This command associates a VRRP instance with master controller
redundancy.
vrrp This command configures the Virtual Router Redundancy Protocol (VRRP).
master-redundancy peer-
ip
This command configures the IP address and preshared key or certificate for a
redundant master controller on another master controller.
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master controllers.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show master-redundancy | 1726