Concept Guide

show tunneled-node config
show tunneled-node config
Description
Displays wired tunneled node configuration details.
Syntax
No parameters.
Example
The output of this command shows the tunneled node configuration details.
(host) # show tunneled-node config
Tunneled Node:Enabled
Tunneled Node Server:4.4.4.1
Tunnel Loop Prevention:Disabled
Tunnel Node MTU:5000
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.1
The command name was changed to show tunneled-node config.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show tunneled-node config | 1737