Concept Guide

show ntp status
show ntp status
Description
Show information for a NTP server.
Syntax
No parameters.
Example
The following example shows values for the primary NTP server.
(host) #show ntp status
Authentication: enabled
time since restart: 2347
time since reset: 7594
packets received: 4
packets processed: 0
current version: 0
previous version: 0
declined: 0
access denied: 0
bad length or format: 0
bad authentication: 0
rate exceeded: 0
system peer: 10.1.1.250
system peer mode: client
leap indicator: 00
stratum: 3
precision: -18
root distance: 0.03236 s
root dispersion: 0.06728 s
reference ID: [10.1.1.250]
reference time: cd45b701.bcbc05d5 Tue, Feb 17 2009 14:21:53.737
system flags: auth monitor ntp kernel stats
jitter: 0.005020 s
stability: 0.866 ppm
broadcastdelay: 0.003998 s
authdelay: 0.000000 s
The output of this command includes the following parameters:
Parameter Description
authentication
Indicates if authentication is enabled for the NTP server.
time since restart
Time in hours since the system was last rebooted.
time since reset The number of seconds since the last time the local NTP server was
restarted.
packets received
Total number of packets received.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ntp status | 1751