Concept Guide
show pan state
show pan state
Description
This command shows the current connection status of PANfirewalls.
Syntax
No syntax.
Usage Guidelines
Issue this command to see the connection status of the PAN firewalls associated with the controller.
(host) #show pan state
Palo Alto Networks Servers Connection State[PAN-Group-1]
--------------------------------------------------------
Firewalls State
--------- -----
1.2.3.4:443 DOWN
2.2.2.2:123 UP[11/25/13 12:45:49]Established
3.3.3.3:333 UP[11/25/13 12:45:48]Established
1.1.1.1:443 UP[11/25/13 12:45:50]Established
Command History
Modification
ArubaOS 6.4 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master or local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show pan state | 1760