Concept Guide

show profile-errors
show profile-errors
Description
Displays the list of invalid user-created profiles.
Syntax
No parameters.
Example
The output of this command shows list of profiles that are invalid and also displays the error in those profiles.
In this example, the VLAN 1000 that is mapped to a virtual-ap that does not exist.
(host) #show profile-errors
Invalid Profiles
----------------
Profile Error
------- -----
wlan virtual-ap "test-vap" VLAN 1000 does not exist
The following are the list of some profile errors:
Error Description
Named VLAN [named_VLAN] is removed
These errors are displayed if a virtual AP profile is
configure with a VLAN that does not exist.
Named VLAN [named_VLAN] is not mapped
Named VLAN [named_VLAN] is invalid
VLAN [x] does not exist
Server group is invalid
This error is displayed if an AAA profile is
configured an invalid server group.
User derivation rule is invalid
This error is displayed if a user role in an AAA
profile is invalid.
User role is invalid
Controller country code is undefined
These errors are displayed, if your controller is not
set to the correct country code or if the country
code specified in a WLAN profile does not match
the controller’s country code.
Country [country_name] does not match controller
country [country_name]
Opmode requires WPA key
This message is displayed if a SSID profile is
configured without a WPA key.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show profile-errors | 1786