Concept Guide

1868| show rf spectrum-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
The output of this command includes the following information:
Parameter Description
Age Out: WIFI
The number of seconds for which a wifi device
must stop sending a signal before the spectrum
monitor considers that device no longer active on
the network. The default value is 600 seconds.
Age Out: Generic Interferer
The number of seconds for which an unknown
device must stop sending a signal before the
spectrum monitor considers that device no longer
active on the network. The default value is 30
seconds.
Age Out: Microwave
The number of seconds for which a microwave
device must stop sending a signal before the
spectrum monitor considers that device no longer
active on the network. The default value is 15
seconds.
Note that this parameter is applicable to 2.4GHz
spectrum monitor radios only.
Age Out: Microwave (inverter type)
The number of seconds for which an inverter
microwave must stop sending a signal before the
spectrum monitor considers that device no longer
active on the network. The default value is 15
seconds.
Note that this parameter is applicable to 2.4GHz
spectrum monitor radios only.
Age Out: Video Device
The number of seconds for which a video device
must stop sending a signal before the spectrum
monitor considers that device no longer active on
the network. The default value is 60 seconds.
Age Out: Audio Device
The number of seconds for which an audio device
must stop sending a signal before the spectrum
monitor considers that device no longer active on
the network. The default value is 10 seconds.
Age Out: Cordless Phone Fixed Frequency
The number of seconds for which a fixed frequency
cordless phone must stop sending a signal before
the spectrum monitor considers that device no
longer active on the network. The default value is
10 seconds.
Age Out: Generic Fixed Frequency
The number of seconds for which a generic fixed
frequency device must stop sending a signal before
the spectrum monitor considers that device no
longer active on the network. The default value is
10 seconds.