Concept Guide

show rrm dot11k beacon-report
show rrm dot11k beacon-report
Description
Displays the beacon report information sent by a client to its AP.
Syntax
No parameters.
Example
The output of this command shows the beacon report for the client 00:1f:6c:7a:d4:fd.
(host) # show rrm dot11k beacon-report station-mac 00:1f:6c:7a:d4:fd
802.11K Beacon Report Details
--------------------------------------------------
Channel BSSID Reg Class Antenna ID Meas. Mode
---------- ------- ------------ ------------- ----------------
1 00:0b:86:6d:3e:40 0 1 Bcn Table
Num Elements:1
Command History
This command was available in ArubaOS 3.4
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show rrm dot11k beacon-report | 1881