Concept Guide

192| ap provisioning-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Default Range
usb-passwd
A PPP password, if provided by the cellular service
provider
— —
usb-power-mode auto|
enable|disable
Set the USB power mode to control the power to the USB
port.
— —
usb-tty
The TTY device path for the USB modem. This parameter
only needs to be specified if the default path is not
correct.
— —
usb-tty-control
The TTY device control path for the USB modem. This
parameter only needs to be specified if the default path
is not correct.
— —
usb-type
Specify the USB driver type.
l acm: Use ACM driver
l airprime: Use Airprime driver
l beceem-wimax: Use Beceem driver for 4G-WiMAX
l ether: Use CDC Ether driver for direct IP4G device
l hso: Use HSO driver for newer Option
l none: Disable 3G or 2G network on USB
l option: Use Option driver
l pantech-3g: Same as "pantech-uml290" - to support
upgrade
l pantech-uml290: Use Pantech USB driver for
UML290 device
l ptumlusbnet: Use Pantech USB driver for 4G device
l rndis: Use a RNDIS driver for a 4G device
l sierra-evdo: Use EVDO Sierra Wireless driver
l sierra-gsm: Use GSMSierra Wireless driver
l sierrausbnet:Use SIERRA Direct IP driver for 4G
device
l storage: Use USBflash as storage device for storing
RAP certificates
— none
usb-user
The PPP username provided by the cellular service
provider
— —
Usage Guidelines
The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These
settings can be saved or assigned to an AP group via the command ap-group <group> provisioning-profile
<profile>.
In order to enable cellular uplink for a remote AP (RAP), the RAP must have the device driver for the USB data
card and the correct configuration parameters. ArubaOS includes device drivers for the most common