Concept Guide

show time-range
show time-range [<name>|summary]
Description
Displays the list of time range configured in the system and rules affected by the time range.
Syntax
No parameters.
Example
The output of this command shows the absolute time range details.
(host) # show time-range
Time-Range monitoring, Absolute
-------------------------------
StartDate Start-time EndDate End-time Applied
--------- ---------- ------- -------- -------
4/29/2009 23:00 4/30/2009 12:00 No
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show time-range | 1921