Concept Guide

show usb
crypto-local
show usb [cellular|ports|test|verbose]
Description
Display detailed USB device information.
Syntax
Parameter Description
cellular
Enter the keyword cellular to display cellular devices.
ports
Enter the keyword ports to display detailed TTY port information such
as signal strength.
test
Enter the keyword test to test the USB TTY ports.
NOTE: Testing an invalid modem port may cause the controller to
“hang”. To resolve this, unplug and re-plug the modem.
verbose
Enter the keyword verbose to display detailed USB information
including serial number and USB type.
Examples
The USB Device table, in the example below, displays the USB port is in the 'Device Ready' state, meaning that
the port has passed the diagnostic test and is ready to send and receive data.
(host) (config-cellular new_modem)# show usb
USB Device Table
----------------
Address Product Vendor ProdID Serial Type Profile State
------- ------- ------ ------ ------ ---- ------- -----
18 Novatel Wireless CDMA 1410 4100 091087843891000 Cellular new_modem Device
ready
Below is an example of the show usb verbose display output (partial).
(host) #show usb verbose
...
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1410 ProdID=4100 Rev= 0.00
S: Manufacturer=Novatel Wireless Inc.
S: Product=Novatel Wireless CDMA
S: SerialNumber=091087843891000
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
...
Command History
Introduced in ArubaOS 3.4.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show usb | 1964