Concept Guide

20| aaa authentication captive-portal Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
black-list
Name of an existing black list on an
IPv4 or IPv6 network destination.
The black list contains websites
(unauthenticated) that a guest
cannot access.
Specify a netdestination host or
subnet to add that netdestination to
the captive portal blacklist.
If you have not yet defined a
netdestination, use the CLI
command netdestination to define
a destination host or subnet before
you add it to the blacklist.
— —
clone
Name of an existing Captive Portal
profile from which parameter
values are copied.
— —
default-guest-role
Role assigned to guest. — guest
default-role <role>
Role assigned to the Captive Portal
user when that user logs in. When
both user and guest logons are
enabled, the default role applies to
the user logon; users logging in
using the guest interface are
assigned the guest role.
— guest
enable-welcome-
page
Displays the configured welcome
page before the user is redirected
to their original URL. If this option is
disabled, redirection to the web
URL happens immediately after the
user logs in.
enabled/
disabled
enabled
guest-logon
Enables Captive Portal logon
without authentication.
enabled/
disabled
disabled
ipaddr-in-redirection-url
<ipaddr>
Sends the controller’s interface IP
address in the redirection URL
when external captive portal
servers are used. An external
captive portal server can
determine the controller from
which a request originated by
parsing the ‘switchip’ variable in the
URL. This parameter requires the
Public Access license.
— —
login-page <url>
URL of the page that appears for
the user logon. This can be set to
any URL.
— /auth/index.
html