Concept Guide

show whitelist-db cpsec-master-switch-list
show cpsec-master-ctlr-list-db cpsec
show whitelist-db cpsec-master-switch-list [mac-address <mac-address>]
Description
Display the master switch list whitelist on local controllers with APs using the control plane security feature.
Syntax
Parameter Description
mac-address <mac-address>
MAC address of the master controller.
Usage Guidelines
When you use the control plane feature on a network with both master and local controllers, each local
controller has a master switch whitelist which contains the IP and MAC addresses of its master controller. If
your network has a redundant master controller, then this whitelist will contain more than one entry.
To view information for a single master controller, use the command show whitelist-db cpsec-master-
switch-list mac-address <mac-address>. To view a list of all master controllers, use the command show
whitelist-db cpsec-master-switch-list.
Example
The following command shows that the local controllers have a single master controller with the IP address
10.3.53.3:
(host) #show whitelist-db cpsec-master-list
Registered Master Switch Details
--------------------------------
Active MAC-Address IP-Address Sequence Number Remote Sequence Number NULL Update
Count
------ ----------- ---------- --------------- ---------------------- --------------
---
1 00:0b:86:61:ed:6c 10.3.53.11 1 3 1
Local Purge Remote Purge Remote Last-Seq Last Update Sent Last Update Received
----------- ------------ --------------- ---------------- --------------------
0 0 1 Tue Aug 2 13:33:29 2012 Tue Aug 2 13:33:18 2012
The output of this command includes
Syntax
Parameter Description
MAC-Address
MAC address of the master controller.
IP-Address
IP address of the master controller.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show whitelist-db cpsec-master-switch-list | 2038