Concept Guide

show whitelist-db cpsec-seq
show whitelist-db cpsec-seq
Description
Display the current sequence number for the master or local controller whitelists.
Syntax
No Parameters
Usage Guidelines
The current sequence number in the Sequence Number Details table shows the number of changes to the
campus AP whitelist made on this controller.
Each controller compares its campus AP whitelist against whitelists on other controllers every two minutes. If a
controller detects a difference, it will send its changes to the other controllers on the network. If all other
controllers on the network have successfully received and acknowledged all whitelist changes made on this
controller, every entry in the sequence number column in the controller whitelist will have the same value as
the number displayed in the Sequence Number Details table. If a controller in the master or local controller
whitelist has a lower sequence number, that controller may still be waiting to complete its update, or its update
acknowledgement may not have yet been received.
Example
The output of the first command below shows that the campus AP whitelist has been updated 3 times on the
master controller. The second command shows the local controller list on the master controller, and verifies
that both local controllers have received and acknowledged all three of these changes.
(host) #show whitelist-db cpsec-seq
Sequence Number Details
-----------------------
Table Name Current Seq Number
---------- ------------------
cpsec_whitelist 3
Whitelist Entries: 97
(host) # show whitelist-db cpsec-local-list
Registered Local Controller Details
-----------------------------------
MAC-Address IP-Address Sequence Number Remote Sequence Number NULL Update Count
----------- ---------- --------------- ---------------------- -----------------
00:0b:86:51:a5:4c 10.3.53.2 3 1
0
00:A0:C9:14:C8:29 10.3.53.4 3 0
0
Whitelist Entries: 2
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show whitelist-db cpsec-seq | 2040