Concept Guide

2043| show whitelist-db cpsec-status Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Total entries
Total number of entries in the campus AP whitelist
Approved entries:
Number of APs that are valid, but is waiting to receive a certificate.
Unapproved entries
Number of APs that have certificate that was not not approved.
Certified entries
Number of APs that have an approved certificate.
Certified hold entries
Number of APs in the certified hold state. An AP is put in this state
when the controller thinks the AP a certified certificate yet the AP
requests to be certified again. Since this is not a normal condition, the
AP will not be reapproved as a secure AP until a network administrator
manually changes the status of the AP to verify that it is not
compromised.
Revoked entries
Number of APs whose entries have been revoked
Marked for deletion entries
Number of APs whose entries have been marked for deletion. An entry
will not be permanently deleted until all other controllers on the
network acknowledge the deletion.
Related Commands
Command Description
show whitelist-db cpsec
Display the campus AP whitelist for campus APs using the control
plane security feature.
Command History
Version Description
ArubaOS 5.0 Command introduced.
ArubaOS 6.4.3.0 The Whitelist-sync is enabled parameter was introduced as part of the
command output.
This command was introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Enable mode on master or local
controllers