Concept Guide

show whitelist-db rap-status
show whitelist-db rap-status
Description
Display aggregate status information APs in the remote AP whitelist.
Syntax
No parameters.
Example
The output of the following command shows current status information for all APs in the remote AP whitelist:
(host) #show whitelist-db rap-status
Entries in Whitelist database
Total entries: 41
Revoked entries: 1
Marked for deletion entries: 0
The output of this command includes
Syntax
Parameter Description
Total entries
Total number of entries in the remote AP whitelist
Revoked entries
Number of remote APs whose entries have been revoked
Marked for deletion entries
Number of remote APs whose entries have been marked for deletion.
An entry will not be permanently deleted until all other controllers on
the network acknowledge the deletion.
Related Commands
Command Description Mode
show whitelist-db rap-master-
switch-list
Display the list of master controllers with remote APs
managed using the remote AP whitelist
Enable or
Config mode
show whitelist-db rap-local-
switch-list
Display the list of local controllers with remote APs
managed using the remote AP whitelist
Enable or Config
mode
show whitelist-db rap View detailed information for the remote AP whitelist
database.
Enable or Config
mode
whitelist-db rap add Add an AP entry to the remote AP whitelist. Config mode
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show whitelist-db rap-status | 2052