Concept Guide

2057| show wlan bcn-rpt-req-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Interface
Specifies the Radio interface for transmitting the Beacon
Report Request frame. It can have a value of either 0 or 1.
Regulatory Class
Specifies the Regulatory Class field in the Beacon Report
Request frame.
Channel
Specifies the Channel field in the Beacon Report Request
frame.
Randomization Interval
Specifies the Randomization Interval field in the Beacon
Report Request frame. The Randomization Interval is used
to specify the desired maximum random delay in the
measurement start time. It is expressed in units of TUs
(Time Units).
Measurement Duration
Specifies the Measurement Duration field in the Beacon
Report Request frame. The Measurement Duration is set
to the duration of the requested measurement. It is
expressed in units of TUs.
Measuremement Mode for Beacon Reports
Specifies the mode used for the measurement. The valid
measurement modes are:
l active-all-ch
l active-ch-rpt
l beacon-table
l passive
Reporting Condition
Specifies the value for the "Reporting Condition" field in
the Beacon Reporting Information sub-element present in
the Beacon Report Request frame.
ESSID Name
Specifies the value for the "SSID" field in the Beacon
Report Request frame.
Reporting Detail
Indicates the value for the "Detail" field in the Reporting
Detail sub-element present in the Beacon Report Request
frame.
Measurement Duration Mandatory
Specifies the "Duration Mandatory" bit of the
Measurement Request Mode field of the Beacon Report
Request frame.
Request Information values
Indicates the contents of the Request Information IE that
could be present in the Beacon Report Request frame. The
Request Information IE is present for all Measurement
Modes except the 'Beacon Table' mode. It consists of a list
of Element IDs that should be included by the client in the
response frame.
Command History
The command is introduced in ArubaOS 6.2.