Concept Guide

show wlan ht-ssid-profile
show wlan ht-ssid-profile [<profile>]
Description
Show a list of all High-throughput SSID profiles, or display detailed configuration information for a specific
High-throughput SSID profile.
Syntax
Parameter Description
<profile> Name of a High-throughput SSID profile.
Usage Guidelines
Issue this command without the <profile> parameter to display the entire High-throughput SSID profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured High-throughput SSID profiles. The
References column lists the number of other profiles with references to the High-throughput SSID profile,
and the Profile Status column indicates whether the profile is predefined. (User-defined profiles will not have
an entry in the Profile Status column.)
(host) #show wlan ht-ssid-profile
High-throughput SSID profile List
---------------------------------
Name References Profile Status
---- ---------- --------------
default 2
dot1X_CP-htssid_prof 1
ade-sloan-htssid_prof 1
Total:3
The following example shows configuration settings defined for the profile default.
(host) #show wlan ht-ssid-profile default
High-throughput SSID profile "default"
--------------------------------------
Parameter Value
--------- -----
High throughput enable (SSID) Enabled
40 MHz channel usage Enabled
Very High throughput enable (SSID) Enabled
80 MHz channel usage (VHT) Enabled
BA AMSDU Enable Enabled
Temporal Diversity Enable Disabled
Legacy stations Allowed
Low-density Parity Check Enabled
Maximum number of spatial streams usable for STBC reception 1
Maximum number of spatial streams usable for STBC transmission 1
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wlan ht-ssid-profile | 2097