Concept Guide

Parameter Description
DTIM Interval
The interval, in milliseconds, between the
sending of Delivery Traffic Indication
Messages (DTIMs) in the beacon.
802.11a Basic Rates
List of supported 802.11a rates, in Mbps,
that are advertised in beacon frames and
probe responses.
802.11a Transmit Rates
Set of 802.11a rates at which the AP is
allowed to send data.
802.11g Basic Rates
List of supported 802.11b/g rates, in Mbps,
that are advertised in beacon frames and
probe responses.
802.11g Transmit Rates
Set of 802.11b/g rates at which the AP is
allowed to send data.
Station Ageout Time
Time, in seconds, that a client is allowed to
remain idle before being aged out.
Max Transmit Attempts
Maximum transmission failures allowed
before the client gives up.
RTS Threshold
Wireless clients transmitting frames larger
than this defined threshold must issue
Request to Send (RTS) and wait for the AP to
respond with Clear to Send (CTS).
Short Preamble
Shows if the profile enables or disables
short preamble for 802.11b/g radios
Max Associations
Maximum number of wireless clients for the
AP
Wireless Multimedia (WMM)
Shows if the profile enables or disables
WMM, also known as IEEE 802.11e
Enhanced Distribution Coordination
Function (EDCF)
Wireless Multimedia U-APSD (WMM-UAPSD) Powersave
Shows if the profile enables or disables
Wireless Multimedia (WMM) UAPSD
powersave.
WMM TSPEC Min Inactivity Interval
Specifies the minimum inactivity time-out
threshold of WMM traffic.
DSCP mapping for WMM voice AC
DSCP value used to map WMM voice traffic.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wlan ssid-profile | 2106