Concept Guide

2123| show wlan voip-cac-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Allow Idle VOIP Client Disabled
The output of this command includes the following data columns:
Parameter Description
VoIP Call Admission Control
Shows if the profile enables or disables
Wi-Fi VoIP CAC features.
VoIP Bandwidth based CAC
Shows the desired CAC mechanism:
l Disable - CAC is based on Call Counts
l Enable - CAC should be based on
Bandwidth.
VoIP Call Capacity
Number of simultaneous calls that can be
handled by one radio.
VoIP Bandwidth Capacity (kbps)
The maximum bandwidth that can be
handled by one radio, in kbps.
VoIP Call Handoff Reservation
Percentage of call capacity reserved for
mobile VoIP clients on call.
VoIP Send SIP 100 Trying
Shows if the profile enables or disables
sending of SIP 100 - trying messages to a
call originator to indicate that the call is
proceeding.
VoIP Disconnect Extra Call
If enabled, the controller disconnects
calls that exceed the high capacity
threshold by sending a deauthentication
frame.
VOIP TSPEC Enforcement
Shows if the profile enables or disables
validation of TSPEC requests for CAC.
VOIP TSPEC Enforcement Period
Maximum time for the station to start the
call after the TSPEC request
VoIP Drop SIP Invite and send status code (client)
Display the status code sent back to the
client if the profile is configured to drop a
SIP Invite:
l 480: Temporary Unavailable
l 486: Busy Here
l 503: Service Unavailable
l none: Don't send SIP status code
VoIP Drop SIP Invite and send status code (server)
Display the status code sent back to the
server if the profile is configured to drop
a SIP Invite:
l 480: Temporary Unavailable