Concept Guide

tunneled-node-address
tunneled-node-address <ipaddr>
Description
This command configures the IP address of a tunneled node server.
Syntax
Parameter Description
tunneled-node-address
IP address of the controller. This is the loopback or IP address of the controller
acting as a tunneled node controller.
Usage Guidelines
A Dell controller can operate as a Wi-Fi controller, terminating GRE tunnels from tunneled node switches. As a
Wi-Fi controller, the controller does not perform full Wi-Fi switching functions. Instead, it accepts traffic from
ports designated as tunneled node ports, packages this traffic inside a GRE tunnel, and forwards the traffic
back to a central controller for processing.
Example
The following command configures the address of a controller for tunneled nodes:
(host) (config) #tunneled-node-address 192.168.1.245
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.1
The command name changed to tunneled-node-port.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide tunneled-node-address | 2193