Concept Guide

upgrade-profile
auto-reboot
filepath <filepath>
max-downloads <1-100>
no ...
password <password>
protocol tftp|ftp|scp
serverip <ipaddr>
upgrade-enable
username <username>
Description
The settings in this centralized image upgrade profile allow the master controller to automatically upgrade its
associated local controllers by sending an image from an image server to one or more local controllers.
Syntax
Parameter Description Range Default
auto-reboot
Include this parameter to allow the local controllers to
reboot after they download their new images.
NOTE: If you enable this option, local controllers will
reboot without saving any changes to their current
configuration. If you have any unsaved configuration
changes on your local controller that you want to
retain, do not enable this option.
- Disabled
filepath
file path to the location on the image server where the
image file(s) reside.
- -
max downloads
Maximum number of local controllers that can sim-
ultaneously download a file from a file server. The cent-
ralized image downloading feature supports up to 100
simultaneous downloads. If this field is left blank,
ArubaOS will use its default value of 10 downloads.
1-100 10
password
If you selected the FTP or SCP protocol for the Protocol
type, enter the password that ArubaOS will use to con-
nect to the image server.
- -
protocol
Specify the protocol used to send the software upgrade
from the image server to the local controller.
l TFTP
l FTP
l SCP
- TFTP
serverip
IP address of the image server. - -
upgrade-enable
Issue the upgrade-profile upgrade-enable command to
enable the centralized image upgrade feature.
- Disabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide upgrade-profile | 2195