Concept Guide

22| aaa authentication captive-portal Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
server-group <group-name>
Name of the group of servers used
to authenticate Captive Portal
users. See aaa server-group on
page 107.
— —
show-fqdn
Allows the user to see and select
the fully-qualified domain name
(FQDN) on the login page. The
FQDNs shown are specified when
configuring individual servers for
the server group used with captive
portal authentication.
enabled
disabled
disabled
show-acceptable-use-policy
Show the acceptable use policy
page before the login page.
enabled
disabled
disabled
single-session
Allows only one active user session
at a time.
— disabled
switchip-in-redirection-url
Sends the controller’s IP address in
the redirection URL when external
captive portal servers are used. An
external captive portal server can
determine the controller from
which a request originated by
parsing the ‘switchip’ variable in the
URL.
enabled
disabled
disabled
url-hash-key <key>
Issue this command to hash the
redirection URL using the specified
key.
— disabled
user-idle-timeout
The user idle timeout for this
profile. Specify the idle timeout
value for the client in seconds. Valid
range is 30-15300 in multiples of
30 seconds. Enabling this option
overrides the global settings
configured in the AAA timers. If this
is disabled, the global settings are
used.
— disabled
user-logon
Enables Captive Portal with
authentication of user credentials.
enabled
disabled
enabled
user-vlan-in-redirection-url
<ipaddr>
Add the user VLAN in the
redirection URL. This parameter
requires the Public Access license.
enabled
disabled
disabled
user-vlan-redirection-url
Sends the user’s VLAN ID in the
redirection URL when external
captive portal servers are used.
— —