Concept Guide

usb reclassify
crypto-local
usb reclassify <address>
Description
Disconnect and reclassify an USB device.
Syntax
Parameter Description
<address>
USB device address from the show usb command.
Usage Guidelines
There's no way to power off an USB port on a controller, but you can re-initialize the device using the usb
reclassify command. This command removes the modem from the USB device list, then detects it via the USB
table.
Command History
Introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master and local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide usb reclassify | 2200