Concept Guide

whitelist-db cpsec revoke
whitelist-db cpsec revoke mac-address <mac-address> revoke-text <revoke-text>
Description
Revoke a certificate from an AP in the campus AP whitelist.
Syntax
Parameter Description
mac-address <mac-address>
MAC address of the AP you want to remove from the cpsec whitelist
database.
revoke-text <revoke-text>
A brief description why the AP’s certificate was revoked, up to 64
alphanumeric characters. If this comment includes spaces, you must
enclose the comment in quotation marks.
Usage Guidelines
Use this command to revoke a certificate from a invalid or suspected rogue AP.
Example
The following command revokes a certificate from an AP. This command does not delete a whitelist entry for a
revoked AP, but marks its entry with the revoked state.
(host) (config) #whitelist-db cpsec revoke mac-address 00:1E:37:CA:D4:51
revoke-text "revoking cert from a rogue AP."
Related Commands
Command Description Mode
show whitelist-db cpsec
Show the campus AP whitelist for the control plane
feature.
Enable mode
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Config mode on master or local
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide whitelist-db cpsec revoke | 2258