Concept Guide

2285| wlan edca-parameters-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Usage Guidelines
EDCA profiles are specific either to APs or clients. You apply an EDCA profile to a specific SSID profile. use this
command only under the guidance of your Dell technical support representative.
The following are the default values configured for APs:
Access Category ecw-min ecw-max aifsn txop acm
best-effort 4 6 3 0 No
background 4 10 7 0 No
video 3 4 1 94 No
voice 2 3 1 47 No
The following are the default values configured for clients:
Access Category ecw-min ecw-max aifsn txop acm
best-effort 4 10 3 0 No
background 4 10 7 0 No
video 3 4 2 94 No
voice 2 3 2 47 No
Example
The following command configures an EDCA profile for APs:
(host) (config) #wlan edca-parameters-profile ap edca1
best-effort ecw-min 15 ecw-max 15 aifsn 15 txop 100 acm 1
Command History
Version Description
ArubaOS 3.1
Command introduced.
ArubaOS 3.4.1
License requirements changed in ArubaOS 3.4.1, so the command requires
the PEF license instead of the Voice Services Module license required in
earlier versions.
This command was introduced in ArubaOS 3.1.