Concept Guide

wlan hotspot h2qp-op-cl-profile
wlan hotspot h2qp-op-cl-profile <profile>
clone
no
op-cl <1-255>
Description
This command defines a Hotspot 2.0 Query Protocol (H2QP) profile that defines the Operating Class to be sent
in the ANQP IE.
Syntax
Parameter Description
clone
Makes a copy of an existing hotspot operating class profile.
no
Negates any existing parameter, returning it to its default disabled value.
op-cl
Configures the operating class for the devices’ BSS. The supported range for this field is 1-
255, and the default value is 1.
Usage Guidelines
The values configured in this H2QP Operating Class profile define the channels on which the hotspot is capable
of operating. It may be useful where, for instance, a mobile device discovers a hotspot in the 2.4 GHz band but
finds it is dual-band and prefers the 5 GHz band. For a definition of these global operating classes, refer to
Table E-4 of IEEE Std 802.11-2012, Annex E.
Values configured in this profile will not be sent to clients unless you:
1. Associate the H2QP profile with an ANQP advertisement profile. (wlan hotspot advertisement profile
<profile-name> h2qp-op-cl-profile <profile-name> )
2. Associate the ANQP advertisement profile with a Hotspot profile. (wlan hotspot h2-profile
advertisement-profile <profile-name> )
3. Enable the hotspot feature within that Hotspot profile. (wlan hotspot h2-profile <profile-name>
hotspot-enable )
Example
The following example configures and enables a profile with the default operating class value.
(host)(config)#wlan hotspot h2qp-op-cl-profile
op-cl 1
enable
Command History
This command was introduced in ArubaOS 6.4
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan hotspot h2qp-op-cl-profile | 2313