Concept Guide

2323| wlan hotspot hs2-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
roam-cons-len-1
Length of the OI. The value of the roam-cons-len-1 parameter is
based upon the number of octets of the roam-cons-oi-1 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
roam-cons-len-2
Length of the OI. The value of the roam-cons-len-2 parameter is
based upon the number of octets of the roam-cons-oi-2 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
roam-cons-len-3
Length of the OI. The value of the roam-cons-len-3 parameter is
based upon the number of octets of the roam-cons-oi-3 field.
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
roam-cons-oi-1
Roaming consortium OI assigned to one of the service provider’s top
three roaming partners. This additional OI will only be sent to a client
if the addtl-roam-cons-ois parameter is set to 1 or higher.
NOTE: The service provider’s own roaming consortium OI is
configured using the wlan hotspot anqp-roam-cons-profile
command.
roam-cons-oi-2
Roaming consortium OI assigned to one of the service provider’s top
three roaming partners. This additional OI will only be sent to a client
if the addtl-roam-cons-ois parameter is set to 2 or higher.
NOTE: The service provider’s own roaming consortium OI is
configured using the wlan hotspot anqp-roam-cons-profile
command.
roam-cons-oi-3
Roaming consortium OI assigned to one of the service provider’s top
three roaming partners. This additional OI will only be sent to a client
if the addtl-roam-cons-ois parameter is set to 3.
NOTE: The service provider’s own roaming consortium OI is
configured using the wlan hotspot anqp-roam-cons-profile
command.
time-advt-cap
no-std-ext-timesrc
timestamp-offset-utc
reserved
This parameter specifies the AP’s source of external time, and the
current condition of its timing estimator.
l no-std-ext-time-src: The AP using this profile has no
standardized external time source.
l timestamp-offset-utc: The AP has a timestamp offset based on
UTC.
l reserved: This setting is reserved for future use, and should not