Concept Guide

Parameter Description Range Default
l triggered
traffic-id <traffic-id>
The parameter is used to set the
Traffic Identifier field in the Transmit
Stream/Category Measurement
Request frame. The Traffic Identifier
field contains the TID subfield. The
TID subfield indicates the TC or TS
for which traffic is to be measured.
0-255 96
Usage Guidelines
The tsm-req-profile is a part of the 802.11K profile. It is used to configure the parameters for the Transmit
Stream/Category Measurement frames. It takes effect only when the 802.11K feature is enabled.
Example
(host) (config) # wlan tsm-req-profile default
(host) (TSM Report Request Profile "default") #bin0-range 1
(host) (TSM Report Request Profile "default") #dur-mandatory
(host) (TSM Report Request Profile "default") #measure-duration 25
(host) (TSM Report Request Profile "default") #num-repeats 0
(host) (TSM Report Request Profile "default") #random-interval 0
(host) (TSM Report Request Profile "default") #request-mode normal
(host) (TSM Report Request Profile "default") #traffic-id 96
Command History
This command is introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms
Base operating system
Configuration mode on master and
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan tsm-req-profile | 2357