Concept Guide

2367| wlan virtual-ap Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
multi-association
Enables or disables multi-
association for this virtual AP.
When enabled, this feature
allows a station to be
associated to multiple APs. If
this feature is disabled, when a
station moves to new AP it will
be de authorized by the AP to
which it was previously
connected, deleting station
context and flushing key
caching information.
— disabled
no
Negates any configured
parameter.
— —
outer-vlan
List of VLANs that can be used
for QinQ outer vlan in this
virtual AP.
— —
preserve-vlan
This parameter allows clients to
retain their previous VLAN
assignment if the client
disassociates from an AP and
then immediately re-associates
either with same AP or another
AP on same controller.
rap-operation
Configures when the virtual AP
operates on a remote AP:
l always—Permanently
enables the virtual AP
(Bridge Mode only). This
option can be used for non-
802.1X bridge VAPs.
l backup—Enables the virtual
AP if the remote AP cannot
connect to the controller
(Bridge Mode only). This
option can be used for non-
802.1X bridge VAPs.
l persistent—Permanently
enables the virtual AP after
the remote AP initially
connects to the controller
(Bridge Mode only). This
option can be used for any
(Open/PSK/802.1X) bridge
VAPs.
l standard—Enables the
virtual AP when the remote
AP connects to the
controller. This option can
be used for any
always/
backup/
persistent/
standard
standard