Concept Guide

2373| wlan voip-cac-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
<bandwidth-capacity>
Maximum bandwidth that
can be handled by one
radio, in kbps. The default
value is 2000 kbps (2 Mbps)
1-
60000
0
2000
call-admission-
control
Enables or disables WiFi
VoIP CAC features.
— disabled
call-capacity
Number of simultaneous
calls that can be handled by
one radio.
2-8000 10
call-handoff-reservation
Percentage of call capacity
reserved for mobile VoIP
clients on call.
0-100 20%
clone
Name of an existing VoIP
CAC profile from which
parameter values are
copied.
— —
disconnect-ex
tra-call
Disconnects calls that
exceed the high capacity
threshold by sending a
deauthentication frame.
— disabled
no
Negates any configured
parameter.
— —
send-sip-100-
trying
Enables sending of SIP 100 -
trying messages to a call
originator to indicate that
the call is proceeding. This is
useful when the SIP invite
may be redirected through a
number of servers before
reaching the controller.
— enabled
send-sip-status-code client|server <code>
Use this parameter with the
client or server options to
drop a SIP Invite and send
status code back to the
client or server. You must
also include one of the
following codes:
l 480: Temporary
Unavailable
l 486: Busy Here
l 503: Ser vice Unavailable
l none: Don't send SIP
status code
— 486