Concept Guide

wlan wmm-traffic-management-profile
wlan wmm-traffic-management-profile <profile-name>
background <share>
best-effort <share>
clone <source>
enable-shaping
no
video <share>
voice <share>
Description
This command configures bandwidth shaping for WMM access categories.
The bandwidth shaping is applied on down-link traffic only.
Syntax
Parameter Description Range Default
background <share>
Bandwidth allocation in percentage (%) for WMM
background access traffic category.
1-99 5
best-effort <share>
Bandwidth allocation in percentage (%) for WMM
best effort access traffic category.
1-99 5
clone <source>
Copy configuration from another WMM Traffic man-
agement profile.
— —
enable-shaping
Enable a bandwidth shaping policy so that the
allocated bandwidth share is appropriately used.
— disabled
no
Negate any configured parameter. — —
video <share>
Bandwidth allocation in percentage (%) for video
access traffic category.
1-99 55
voice <share>
Bandwidth allocation in percentage (%) for voice
access traffic category.
1-99 35
Usage Guidelines
After you configure the WMM traffic management profile, apply it to the virtual AP profile. For WMM
traffic management to take effect, you must enable fair-access or preferred-access parameter under
wlan traffic-management-profile.
Example
The following command configures a WMM traffic management profile:
(host) (config) #wlan wmm-traffic-management-profile test
(host) (WMM Traffic management profile "test") #enable-shaping
(host) (WMM Traffic management profile "test") #background 7
(host) (WMM Traffic management profile "test") #best-effort 10
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan wmm-traffic-management-profile | 2376